Skip to content

Framing Calculator

Estimate studs, plates, and total linear feet for a wall or simple rectangular room. Enter wall size, height, spacing, and openings for a fast framing takeoff.

Choose Single wall for one run, or Rectangular room for a four-wall estimate.

16 in OC is the most common residential default.

ft
ft

Adds two extra studs per opening for a quick allowance.

This estimate assumes one bottom plate, a double top plate, and a simple opening allowance. Use your framing plan for headers, cripples, intersecting walls, and code-specific details.

Results are for preliminary material takeoffs only. Verify stud spacing, corner details, plate requirements, and opening framing against approved plans and local building code before ordering lumber.

Powered by CalcTide